X
🔴 Now Live: 2026 Performance Series
Money can't buy this. You and a +1 can win the Ultimate Insider Racing Experience: Sandown Raceway VIP Pit Tours, Tickford HQ access & Supercar Hot Laps.
The Grand Prize (Winner +1)
Valued at $4,950
(Automatically applied to all KO Welding purchases)
Our Cast Iron tables are made using high density sand resin casting, not your regular vacuum castings – We guarantee no pitting, porosity or other inclusions. Greater heat dispersion, and less flex meaning it’ll stay flatter, longer. They are grittier in surface, less scratch prone and more MIG spatter resistant over our steel tables.
All K28 tables feature certified tolerances and superior machining accuracy through several flatness and finishing stages. Each hole undergoes a meticulous four-step process with fine boring for smoother, more accurate cavities. Rounded holes, table corners and a 100mm x 50mm side grid come standard.
SIZE: 3000mm x 1500mm
MATERIAL: T300 Cast Iron – Slightly better suited for MIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: Standard – 4 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
ex-gst$10,950inc-gst$12,045
Heavy-duty table built for serious fabrication. Stays flat, cools fast, takes a beating. All K28 tables feature rounded holes and corners as standard. The side hole grid is 100mm x 50mm.
SIZE: 3000mm x 1500mm
MATERIAL: T300 Cast Iron – Slightly better suited for MIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: Standard – 4 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
MATERIAL: T300 – Cast Iron.
PROPERTIES: High quality sand resin cast, more superior than vacuum cast. Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and engraving lines are rougher (see photo below.
HARDNESS: Nitriding ~450HV.
DENSITY: 7.25 g/cm³.
TENSILE STRENGTH: 345 MPa.
MATERIAL: S355 – STEEL.
PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.
HARDNESS: Nitriding ~550HV.
DENSITY: 7.80 g/cm³.
TENSILE STRENGTH: 355 MPa.
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.
STANDARD: Hole spacing of 100mm.
DIAGONAL: Has an extra hole in the centre compared to the Standard.
50mm: Has a whopping 9 holes per 100mm² – allowing for even more clamping and fixing possibilities!
FLATNESS: ±0.1mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
| Weight | 1388 kg |
|---|---|
| Dimensions | 3050 × 1550 × 400 mm |
© 2025 KO Welding Pty Ltd. All rights reserved. Site built by Bulldog Digital