Used for clamping your workpieces to the side. Featuring a pin with a counter sink bolt (not needed for clamping operation) and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs.
$41 Ex. GST
Our 90° Handle Clamp works similar to our standard 180° Handle Clamp, but is for clamping your workpiece to the side, additionally it can be used as a 180° clamp with the assistance of a locating square (seen in our angles section).
$34 Ex. GST
Thanks to KOWT’s extra finishing steps, our S355 Steel table surface is so smooth you can’t feel any micro ridges when you run a fingernail across it. On top of this, our steel tables have cleaner, sharper etching lines and greater mass than many, meaning more material is used. They are slightly more impact resistant over our cast iron tables.
All K16 tables feature certified tolerances and superior machining accuracy through several flatness and finishing stages. Each hole undergoes a meticulous four-step process with fine boring for smoother, more accurate cavities. Rounded holes, table corners and a 50mm x 50mm side grid come standard.
SIZE: 1000mm x 1000mm
MATERIAL: S355 Steel – Slightly better suited for TIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: Standard – 4 Holes Per 50mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
$2,700 Ex. GST
Bar Stops are extremely useful tools to have in your arsenal. Set and forget for a multitude of jobs. Length: 400mm
$117 Ex. GST
The Super Squares are easily one of the most versatile and useful bits of kit we sell!
Perfect for heavy-duty squaring, extending your table, building raised platforms – and whatever else your imagination can dream up!
MATERIAL: Cast Iron
TREATMENT: Burnished (Rust Resistant)
$427 Ex. GST
Featuring a pin with a counter sink bolt (not needed for clamping operation) and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs.
$41 Ex. GST
Bar Stops are extremely useful tools to have in your arsenal.
$46 Ex. GST
The Versatile Kit is our “jack of all trades master of all” style kit. It’s suited for those shops that do a bit of everything – sheet metal, square tube, round tube, flat bar… the list goes on!
Original price was: $6,004.$5,254Current price is: $5,254. Ex. GST
Same product as our 180° T-Bar Clamp but with a hex nut, enabling you to quickly tighten and loosen your clamp with an impact driver/socket.
$36 Ex. GST
4 Side Open Blocks, have four working surfaces and can be used as a cost effective way to extend your table (over buying a larger table).
Can be used as table extenders, raised platforms and more!
$403 Ex. GST
The Super Squares are easily one of the most versatile and useful bits of kit we sell!
Perfect for heavy-duty squaring, extending your table, building raised platforms – and whatever else your imagination can dream up!
MATERIAL: Cast Iron
TREATMENT: Burnished (Rust Resistant)
$427 Ex. GST
This specific pin allows you to lock any two 12mm materials together.
$26 Ex. GST
V Supports are specifically designed to aid in support of round materials. For use up to 140mm pipe.
$43 Ex. GST
Locating Squares are a great versatile piece of precision steel!
Can be used as stops, table extenders, raised platforms and even a clamping system with the use of our 90° T-Bar Clamp (SKU: K16-CLP-03).
$41 Ex. GST
These Precision Packer Sets are perfect to get you the exact measurement needed. With 0.5 increments, you can be sure of precise spacing of your work pieces.
$46 Ex. GST
Bar Stops are extremely useful tools to have in your arsenal. Set and forget for a multitude of jobs. Distance between hole centres = 25mm.
$20 Ex. GST
Bar Stops are extremely useful tools to have in your arsenal. Set and forget for a multitude of jobs. Oblong hole spans across two linear table holes (50mm).
$33 Ex. GST
Flat Angles, are essentially bar stops with a right angle. Great for jigging up a square frame, and much more!
$43 Ex. GST
Flat Angles, are essentially bar stops with a right angle. Great for jigging up a square frame, and much more!
$95 Ex. GST
This specific pin allows you to lock any three 12mm materials together.
$27 Ex. GST
© 2025 KO Welding Pty Ltd. All rights reserved. Site built by Bulldog Digital