X
🔴 Now Live: 2026 Performance Series
Money can't buy this. You and a +1 can win the Ultimate Insider Racing Experience: Sandown Raceway VIP Pit Tours, Tickford HQ access & Supercar Hot Laps.
The Grand Prize (Winner +1)
Valued at $4,950
(Automatically applied to all KO Welding purchases)
Featuring a Bar Stop with an oblong hole and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs.
$39 Ex. GST
Height Adjustment Devices are used to adjust height and lock V Supports as well as Adjusting Gasket Rods.
$51 Ex. GST
Bar Stops are extremely useful tools to have in your arsenal. Distance between hole centres = 50mm.
$19 Ex. GST
Works about 3x faster than the Standard Ball Locking Pin. Set your fixture, push the pin, twist, done. Same deal removing it – quick twist and it comes straight out, clean and easy. The KO QuickHex Pin makes swapping stops, angles, blocks etc. fast, repeatable and secure.
No allen key. No stuffing around.
$38 Ex. GST
High Tensile Allen Keys suited specifically for K28 Parts.
$25 Ex. GST
Thanks to KOWT’s extra finishing steps, our S355 Steel table surface is so smooth you can’t feel any micro ridges when you run a fingernail across it. On top of this, our steel tables have cleaner, sharper etching lines and greater mass than many, meaning more material is used. They are slightly more impact resistant over our cast iron tables.
All K28 tables feature certified tolerances and superior machining accuracy through several flatness and finishing stages. Each hole undergoes a meticulous four-step process with fine boring for smoother, more accurate cavities. Rounded holes, table corners and a 100mm x 50mm side grid come standard.
SIZE: 1200mm x 1200mm
MATERIAL: S355 Steel – Slightly better suited for TIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: 50mm x 50mm – 9 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
$4,800 Ex. GST
Eccentric Disk stops can be used where a bar stop cannot be, due to its innovative design. They can be secured and spun in an infinite 360 degree plane. 100mm diameter.
$35 Ex. GST
Pre-installed with heavy-duty castors featuring integrated levelling feet. Move your 1+ tonne table with ease, and use the levelling rubber winding insert mechanism to level/ground your table when necessary, with up to 20mm of adjustment.
930-940
MATERIAL: MILD STEEL – 90 x 90mm – 4mm wall thickness
SHAPE: SQUARE
COLOUR: ORANGE
FOOTING: LEVELLING CASTORS
$50 Ex. GST
Flat Angles, are essentially bar stops with a right angle. Great for jigging up a square frame, and much more!
$83 Ex. GST
Stop scratching aluminium/delicates when you clamp it. The KO AluGuard Pad replaces the standard steel contact foot with a matching aluminium face, giving you solid grip without digging in or leaving clamp marks. Swaps straight onto the end of our K28 T-Bar & Hexi clamps (purchased 2023 onwards).
$12 Ex. GST
The Super Squares are easily one of the most versatile and useful bits of kit we sell!
Perfect for heavy-duty squaring, extending your table, building raised platforms – and whatever else your imagination can dream up!
MATERIAL: Cast Iron
TREATMENT: Burnished (Rust Resistant)
$324 Ex. GST
The Super Squares are easily one of the most versatile and useful bits of kit we sell!
Perfect for heavy-duty squaring, extending your table, building raised platforms – and whatever else your imagination can dream up!
MATERIAL: Cast Iron
TREATMENT: Burnished (Rust Resistant)
$324 Ex. GST
These clamping bridges allow you to place a clamp in the middle, thus clamping three points with one clamp!
$83 Ex. GST
Locating Squares are a great versatile piece of precision steel!
Can be used as stops, table extenders, raised platforms and even a clamping system with the use of our 90° T-Bar Clamp (SKU: K28-CLP-03).
$40 Ex. GST
Bar Stops are extremely useful tools to have in your arsenal. Set and forget for a multitude of jobs.
$70 Ex. GST
Brush suited specifically for K28 holes.
$14 Ex. GST
Locating Squares are a great versatile piece of precision steel!
Can be used as stops, table extenders, raised platforms and even a clamping system with the use of our 90° T-Bar Clamp (SKU: K28-CLP-03).
$35 Ex. GST
Not your average C-Clamp! The screw handle is built for faster, smoother use. Quick to lock, easy to release, tough and rubust for heavy-duty fabrication. This K28 Pin C-Clamp offers 75 mm throat depth for precise, secure holds on your 28mm welding table.
$38 Ex. GST
Locating Squares are a great versatile piece of precision steel!
Can be used as stops, table extenders, raised platforms and even a clamping system with the use of our 90° T-Bar Clamp (SKU: K28-CLP-03).
$22 Ex. GST
Allows you to have the best possible earthing connection directly connected to your welding table.
$70 Ex. GST
© 2025 KO Welding Pty Ltd. All rights reserved. Site built by Bulldog Digital