Thanks to KOWT’s extra finishing steps, our S355 Steel table surface is so smooth you can’t feel any micro ridges when you run a fingernail across it. On top of this, our steel tables have cleaner, sharper etching lines and greater mass than many, meaning more material is used. They are slightly more impact resistant over our cast iron tables.
All K28 tables feature certified tolerances and superior machining accuracy through several flatness and finishing stages. Each hole undergoes a meticulous four-step process with fine boring for smoother, more accurate cavities. Rounded holes, table corners and a 100mm x 50mm side grid come standard.
SIZE: 2000mm x 1000mm
MATERIAL: S355 Steel – Slightly better suited for TIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: 50mm x 50mm – 9 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
$6,400 Ex. GST
Heavy-duty table built for serious fabrication. Stays flat, cools fast, takes a beating. All K28 tables feature rounded holes and corners as standard. The side hole grid is 100mm x 50mm.
SIZE: 2000mm x 1000mm
MATERIAL: S355 Steel – Slightly better suited for TIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: 50mm x 50mm – 9 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
MATERIAL: T300 – Cast Iron.
PROPERTIES: High quality sand resin cast, more superior than vacuum cast. Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and engraving lines are rougher (see photo below.
HARDNESS: Nitriding ~450HV.
DENSITY: 7.25 g/cm³.
TENSILE STRENGTH: 345 MPa.
MATERIAL: S355 – STEEL.
PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.
HARDNESS: Nitriding ~550HV.
DENSITY: 7.80 g/cm³.
TENSILE STRENGTH: 355 MPa.
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.
STANDARD: Hole spacing of 100mm.
DIAGONAL: Has an extra hole in the centre compared to the Standard.
50mm: Has a whopping 9 holes per 100mm² – allowing for even more clamping and fixing possibilities!
FLATNESS: ±0.1mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
| Weight | 625 kg |
|---|---|
| Dimensions | 1550 × 1550 × 400 mm |
© 2025 KO Welding Pty Ltd. All rights reserved. Site built by Bulldog Digital